How many usable hosts are in a 29 subnet?

What is a 29 subnet?

/29 means that 29 of the 32 bits of the address are the netmask, therefore, only 3 bits are available for differentiating between computers.

How do you calculate a 29 subnet mask?

255.248 or /29.

  1. Step 1: Convert to Binary.
  2. Step 2: Calculate the Subnet Address. To calculate the IP Address Subnet you need to perform a bit-wise AND operation (1+1=1, 1+0 or 0+1 =0, 0+0=0) on the host IP address and subnet mask. …
  3. Step 3: Find Host Range. …
  4. Step 4: Calculate the Total Number of Subnets and.

How many usable IP addresses are in a 29?

For example, you would request a “/29” subnet from your ISP, and you would be provided with a subnet of 8 IP Addresses, 6 of which are usable – this is because 1 is the network address (the first IP) and one is the broadcast address (the last IP).

How do you calculate hosts per subnet?

To calculate the number of possible hosts per subnet, use the formula 2h – 2, where h equals the number of host bits. The reason two addresses must be subtracted is because of the network address and the broadcast address.

THIS IS INTERESTING:  Best answer: What is the positive impact of foreign direct investment on host country?

How many host can be on a subnet?

1.0. You need to create 5 sub networks each network has a maximum of 10 hosts. We can only use the first 8 bits for out subnets as these 8 bits have been allocated as host addresses. So Subnet masks of 255.255.

How many usable IP addresses are available on the?

255.224. This leaves 5 host bits. With 5 host bits, 32 IP addresses are possible, but one address represents the subnet number and one address represents the broadcast address. Thus, 30 addresses can then be used to assign to network devices.

What does 28 mean in IP address?

Answer: 28 is a subnet mask. IP address has 32 bits in total. 28 denotes network ID while rest of the bits (which are 4 bits) are used for hosts.

How many usable hosts are on a 28 subnet?

IPv6 Subnet Calculator

Prefix size Network mask Usable hosts per subnet
/28 14
/29 6
/30 2

How many host addresses can the following network IP and subnet mask support 192.168 1.0 24?

So, a machine that has an IP address that is 192.168. 1.200 /24 would be in the same subnet. And because the subnet mask is /24, that means that the entire last octet can be used to define host machine – 28 = 256 – 2 = 254 usable addresses.

How many valid host addresses are available on an ipv4 subnet that is configured with a 26 mask?

Explanation: When a /26 mask is used, 6 bits are used as host bits. With 6 bits, 64 addresses are possible, but one address is for the subnet number and one address is for a broadcast. This leaves 62 addresses that can be assigned to network devices.

THIS IS INTERESTING:  What can be host on Azure?